Radial spherical roller bearings PODSIPNIK-VOLGA 3 000 (2….CA; CAC) and others.

Spherical radial roller bearings (type "3") are designed to handle large radial loads and a certain proportion of axial loads in both directions. They are distinguished by the spherical surface of the outer ring, which allows the bearing to independently compensate for angular displacements of the shaft relative to the housing. This design increases the reliability of the equipment when the shafts are not parallel and reduces the impact of misalignment.

Assortment
1. Double row spherical roller bearings with sides on the inner ring

• With a cylindrical hole
• With a conical hole

2. Double row spherical roller bearings with sides on the inner ring and bushings

• On the fixing sleeve
• On the coupling sleeve

3. Double row spherical roller bearings with a flankless inner ring

• With a cylindrical hole
• With a conical hole

4. Double row spherical roller bearings with a flankless inner ring and bushings

• On the fixing sleeve
• On the coupling sleeve

5. Single row radial spherical roller bearings

• With a cylindrical hole
• With a conical hole

6. Toroidal bearings (CARB)

• Special type of bearings for axial and radial displacement compensation

Execution options: 3,000 (2....CA; CAC), 113 000 (2.... SAK), 13 000 (2.... SAK; +N....), 73 000 (2.... SAK; +AN....), 53 000 (2....With; SS), 153 000 (2.... UK), 353 000 (2.... SK; +N...), 753 000 (2.... SK; +AN....), 23 000 (20 000), 20 000 To, 43,000 (Since 2000).